Gentoo Blog

I have always wanted to encrypt my /home partition on my notebook. Due to lack of time and the worries of data lose i never got round to it. But now the time has finally come. Please be careful following this howto if you do anything wrong you may erase all of you data. You have been warned!

aptitude install cryptsetup libpam-mount

We will start of with the swap partition which is easy. First deactivate your swap partition you may need to remove it from /etc/fstab and reboot if it is in use.:

swapoff /dev/sda7

Then fill your swap with random data from /dev/urandom

dd if=/dev/urandom of=/dev/sda7 bs=1M

Configure encrypted swap in /etc/crypttab and /etc/fstab

cat /etc/crypttab

cryptoswap /dev/sda7 /dev/urandom cipher=aes-cbc-essiv:sha256,size=256,hash=sha256,swap

cat /etc/fstab

/dev/mapper/cryptoswap none swap sw 0 0

Okay thats it reboot to test. If you call top from a shell you should see a normal swap partition. Then try and run the follow command you should see something like this:

cryptsetup status cryptoswap
/dev/mapper/cryptoswap is active:
cipher: aes-cbc-essiv:sha256
keysize: 256 bits
device: /dev/sda7
offset: 0 sectors
size: 8401932 sectors
mode: read/write


Ok your swap partition is done lets move on to /home make sure you have an empty partition for this all data on the partition will be deleted. You’ve been warned

Fill your new home partition with random data.

dd if=/dev/urandom of=/dev/sda8

Initialize the partition and set initial key. Please make sure to set a good password and do not forget it otherwise your data is gone.

cryptsetup -c aes-cbc-essiv:sha256 -y -s 256 luksFormat /dev/sda8

Create a device mapping

cryptsetup luksOpen /dev/sda8 cryptohome

Now you can create a file system on cryptohome

mkfs.ext4 -j -m 1 -O dir_index,filetype,sparse_super /dev/mapper/cryptohome

Okay give your new home a test by closing it reopening it and finally the first mount


cryptsetup luksClose cryptohome
cryptsetup luksOpen /dev/sda8 cryptohome
Enter LUKS passphrase:
key slot 0 unlocked.
Command successful.
mkdir -p /mnt/cryptohome
mount /dev/mapper/cryptohome /mnt/cryptohome
touch /mnt/cryptohome/linux
ls /mnt/cryptohome/
lost+found linux


We can also confirm that it works by issuing the command

cryptsetup status cryptohome
/dev/mapper/cryptohome is active:
cipher: aes-cbc-essiv:sha256
keysize: 256 bits
device: /dev/sda8
offset: 2056 sectors
size: 20978771 sectors
mode: read/write


Now would be a good time to move your current home data to this partition. And umount the partition:

umount /mnt/cryptohome
cryptsetup luksClose cryptohome

To mount this partition at boot time do the following. The boot process will stop and you will be prompted for a password:

First edit /etc/cryptotab

cryptohome /dev/sda8 none luks

Then edit /etc/fstab and add

/dev/mapper/cryptohome /home/ ext4 relatime,errors=remount-ro 0 2

Automatically mount when logging in i will write this part shortly so stay tuned.